Replacement sheet for "Raku Hapi Air Conditioner Anti-Mold and Scratch Wiper"

Simply wipe the air conditioner outlet and gaps to remove
Anti-mold for up to 2 months!

Disinfectant mold-causing bacteria in air conditioner air outlets and prevents mold growth!

* Depends on usage environment.

The anti-mildew wiper is amazing!

• Anti-mold sheet with five effects
  ・Mold prevention: Anti-mold coating for up to 2 months (※1)
  ・ Disinfectant: 99% Disinfectant (※2)
  ・Deodorization: Removes moldy odor
  ・Removes dirt: Removes dust and black mold stains
  Dust guard: Prevents dust from sticking
  

  *1 Varies depending on usage environment.

  *2 It does not Disinfectant all bacteria.

• Dedicated wiper that reaches deep into the outlet of the air conditioner
  ・Slim: Width up to 25mm Easy to use even in small areas
  ・Flexible elasticity: Fits flexibly to the curve of the inner wall
  ・Waveform head: Waveform irregularities scrape off dirt

Wet type, unscented

* The wiper body is not included.

Please use the special wipers that come with the "Raku Hapi Air Conditioner Anti-Mold Gap Wiper" (sold separately).

[How to attach a mold-proof sheet]

• Cover the head with a fungicide sheet.
• Insert the round hook into the hole (notch) at the end of the anti-mold sheet and fix it.

【how to use】

• Turn off the air conditioner and be sure to disconnect the plug from the outlet. (If the plug does not come off, drop the breaker.)
• When the power is turned off, the flaps (vertical louvers, wind direction plates) at the outlet are closed, so open them slowly by hand.
• Insert the wiper along the inner wall from the air conditioner outlet and wipe it.

• One piece can prevent mold inside the air outlet of one air conditioner. (If you are particularly concerned about dirt, please use the second sheet.)
• You can use both sides.



< Raku Hapi 's lineup of air conditioners>
We recommend using it as a set!

● For cleaning air conditioner fins: "Raku Hapi Air Conditioner Cleaning Spray Nextplus"
● To prevent mold on air conditioner fins: "Raku Hapi Air Conditioner Anti-Mold Spray"
● To prevent mold inside air conditioners: "Raku Hapi Air Conditioner Mold Prevention Stick-on Type"

Keep the product label so that you can read it as needed.

• Do not use for any purpose.
• It cannot be used for air conditioners that do not open the flaps (louvers in the vertical direction) at the outlet.
• It is not used for air conditioner fins, blower fans, outdoor units, and air conditioner electrical components (sensors, electronic boards, switches, motors).
• Wash hands with water after use.
• If you are rough, use cooking gloves.
• Do not rub your eyes or face with the hand that touched the sheet. Should this get in your eyes, rinse immediately with water.
• The sheet loses its antifungal effect when it dries, so use it immediately after taking it out of the bag.
• Do not leave the sheet out of the bag for a long time. The place where it is placed may be discolored.
• When moving the air conditioner flaps (vertical airflow direction louvers, airflow direction plates), move them slowly. If you move it vigorously, it may break.
• Do not apply too much force when using. The wind direction louver (wind direction plate) may come off, or the blower fan and wiper may be damaged.
• Do not force the wiper head into the gap. The seat may come off or the wiper may be damaged.
• If the sheet comes off, secure it with rubber bands.
• Sheets do not dissolve in water, so do not flush down the toilet.
• If the wiper head becomes dirty, wash it with water and dry it thoroughly.
• Keep out of reach of children, near fire, in direct sunlight, and in places with high temperatures.

This product does not fall under the aviation dangerous goods stipulated by the Civil Aeronautics Law.

View All