Ulmore High Moisturizing Bath Liquid Creamy Floral Scent Refill
A highly moisturizing bath liquid that protects the skin with a moisturizing veil.
Three types of moisturizing ingredients that penetrate deep into the stratum corneum and a moisturizing veil ingredient gently envelop the skin and lock in moisture. Milky white water.
Special site
Where to find
Move to an external site. Please read the contents of each site carefully for prices and service contents, etc., and use them at your own risk.
Product variation
This is a refill for Ulmore Highly Moisturizing Bath Liquid, Creamy Floral Scent.
Gently wraps the skin and locks in moisture
3 types of moisturizing ingredients (CICA extract, ceramide, shea butter) that penetrate deep into the stratum corneum
+ A moisturizing veil ingredient that coats the surface of the skin
[Fragrance] Creamy floral scent
[Color of hot water] Milky white (cloudy)
* Allergy test and stinging test completed (Not all people are allergic and irritated.)
Act For ECO Reduction of plastic consumption
Use of refills reduces the amount of plastic used by approximately 80% (compared to the weight of 0.8 600mL containers)
Do not refill in other containers.
Please refill into the bottle of [Ulmore Highly Moisturizing Bath Liquid (Creamy Floral Scent)] and use.
[How to refill the bottle]
Shake the bag well before opening.
1 bag cut
- Please cut the top of the bag in the direction of the arrow.
※ Please keep in mind that the contents fluid may pop when you hold the bag strongly and cut it.
Pour into 2 bottles
- Hold the bottom of the bag with one hand and hold the center of the bag with the other hand.
- Pour slowly into the bottle from the pouring mouth slowly.
- Wash the bottle with tap water and dry it well before refilling.
- Do not mix with other products.
- Be sure to refill into a bottle of Ulmore Highly Moisturizing Bath Liquid (Creamy Floral Scent).
- After refilling, write down the manufacturing number at the bottom of the bag. You may need it when contacting us.
[How to use after refilling]
- Shake the bottle well. (On rare occasions, turbid components may accumulate at the bottom of the container.)
- Measure using the cap (one fill line is about 40 mL).
- Add 40 to 80 mL of this product to hot water (200 L) in the bathtub, stir well, and take a bath. Due to its concentrated formulation, it may be difficult to dissolve. Please adjust the amount used according to your preference for moisture.
- It can also be used when bathing with a baby (more than 3 months old).
*Please be careful as the bathtub and washing area will become slippery.
*Not a drink.
- Do not use for uses other than bathing.
- If skin or physical condition is abnormal, consult a doctor before use.
- Should you observe any abnormalities such as rash, redness, itchiness and irritation on your skin during or after use, discontinue use and consult a doctor. In particular, people with allergies or those who have experienced hypersensitivity symptoms such as rashes due to drugs should be used with caution.
- If the stock solution gets into your eyes, wash it off immediately.
- This product is not a drink. If swallowed in large quantities, take measures such as drinking water.
- Keep out of reach of children.
[About bathtubs and water heaters]
- There is no sulfur in the bath and the bath pot in this product.
- Use the full automatic water heater or the filter for 24 hours, as filters may get clogged, so check the instructions for your model.
- After use, the inside of the bath kettle and the filter at the circulation port may become white and dirty, so wash thoroughly with water. (Some of the cloudy ingredients may adhere to the scale inside the bath kettle, and may flow out into the bathtub from the circulation port.)
- If you leave the remaining hot water in the bathtub for a long time, the area around the bathtub may become white.
【About the use of remaining hot water】
- The remaining hot water can be used for washing, but use fresh water for rinsing. However, do not use in the following cases. (Combined use with soft finish, soaked, grated clothing)
- Do not pour remaining hot water on plants, as this may have an impact.
This product does not fall under the aviation dangerous goods stipulated by the Civil Aeronautics Law.
Product Name | Ulmore High Moisturizing Bath Liquid Creamy Floral Scent Refill |
---|---|
Sales name | Ulmore SC-3 (creamy floral scent) |
Amount | 480mL (about 12 times) *When using 40mL |
Country of origin/production area | Japan |
component | Water, glycerin, PEG-60 hydrogenated castor oil, titanium dioxide, Ethanol, polysorbate 20, Fragrance, polyquaternium-10 (moisture veil ingredient), Centella asiatica leaf/stem extract (CICA extract), shea butter oil, glucosylceramide, α-glucan, BG, Methyl, propylparaben, Ethanol, PEG/PPG-300/55 copolymer, PEG400, sodium stearoyl Monosodium glutamate, disodium phosphate, sodium chloride, tocopherol |
Share this page
Where to find
Move to an external site. Please read the contents of each site carefully for prices and service contents, etc., and use them at your own risk.
Ulmore High Moisturizing Bath Liquid Creamy Floral Scent Refill
Move to an external site. Please read the contents of each site carefully for prices and service contents, etc., and use them at your own risk.